Equipment

Series X Plus Kegerator with (With 2 x Double Stainless Tower & 4 x NUKATAP)

The worlds most compact turnkey solution for an 8 x Keg kegerator. This model is great value, fits 8 x corny kegs or 2 x 50L kegs. Suitable for two...

1,475⁹³

KegLand Series X - Kegerator (With Single Stainless Tower & 1 NUKATAP)

KEGERATORS SHIP WITH $100 FLAT RATE SHIPPING TO ALL CANADIAN PROVINCES! PLEASE NOTE: KEGERATORS ONLY SHIP VIA UPS, AND CANNOT SHIP TO A PO BOX. This is one configuration you can...

1,034⁹⁸

1.14L PET Liquor Bottle

3⁵⁰

Cannular Electric Can and Bottle Filler 110 v

This Cannular is a filler specifically designed for bottles and cans. Using two adjustable stainless steel tubes it will use one to purge oxygen out of the vessel and then use...

299⁹⁹

Duotight - 8mm (5/16) Female x 8mm (5/16) Female One Way Check Valve (Gas)

This very handy fitting could save you your regulator and is a good investment. This particular type of check valve has low opening pressure of only 1psi. This check valve...

4⁹⁹

Oxebar 20L Amber PET Keg & Pressure Fermenter Tank

Fit up to 3 of these badboys in your Series X.1, X or 4.1 (aka XL). Or fit up to 6 of these in a Series X.1 Plus!Not only will it...

69⁹⁹

4L PET Oxebar Keg with Cap and Handle

This great value re-usable plastic keg is the best way to store your home brew in a smaller sized container than traditional 19L corny kegs. The small 4liter size is...

7⁹⁹

Mammoth Conical Lid Oring 60L

Mammoth Conical Lid Oring

19⁹⁹

Mammoth Brewing Conical Wort Chiller 60L

Use with your Mammoth conical fermenter to pump glycol or cold water to precisely control fermentation temperatures. A drilled conical wort chiller lid is also required. Drilled Lid and wort...

89⁹⁹

Grainfather- G40/G70 Alembic Dome Attachment

A complete set of fittings to connect the G40 & G70 Distilling Lid to the Still Spirits T500 Alembic Condenser* for pot distilling.

659⁹⁹

Grainfather GC4 Glycol Chiller Adapter Kit

The Glycol Chiller Adapter is designed to expand on the capabilities of the Grainfather Glycol Chiller, by allowing almost any fermenter on the market to be connected, and temperature controlled...

299⁹⁹

Mammoth Brewing 6L Ball Lock Keg

Holds 6L. Portable size for taking to parties or the cottage. Made from 304 stainless steel. Includes a 1 year warranty.

99⁹⁹

Mammoth Brewing 12L Ball Lock Keg - New

Easily holds a 3 US Gal (11.5L) batch with room to spare. Portable size for taking to parties or the cottage. Made from 304 stainless steel. Includes a 1 year...

144⁹⁹

Mammoth Conical Lid Oring 30L

Mammoth Conical Lid Oring

13⁹⁹

Mammoth Brewing Conical Wort Chiller Lid 30L

Use with your Mammoth conical fermenter to attach your wort chilling coil. Pump glycol or cold water to precisely control fermentation temperatures. Drilled Lid and wort chiller coil sold separately....

49⁹⁹

Mammoth Brewing Brew Cart

The Mammoth Stainless Steel Brew Cart is sturdy and will last a lifetime. It is perfect for all-in-one brewing systems. It allows you to move your system quickly and conveniently,...

129⁹⁹

Mammoth Brewing 38L Kettle

Brew large batches in the high quality, thick-walled, stainless-steel brewing pot. Made from 304 stainless steel, this brew kettle will last a lifetime. Comes with a high-quality dial thermometer as...

229⁹⁹

Mammoth Airlock and Stopper

Airlock and stopper for Mammoth Fermenter

13⁹⁹

Duotight - 9.5mm (3/8”) Female x 5/8” Female Thread (suits Keg Couplers and Tap Shanks)

Looking for high quality push in fittings that will seal tight? duotight are the push in fitting with superior sealing capacity due to the double o-ring sealing design. Why do...

3⁹⁹

Duotight - 8mm (5/16”) Female x 9.5mm (3/8”) Female Reducer

Looking for high quality push in fittings that will seal tight? Duotight are the push in fitting with superior sealing capacity due to the double o-ring sealing design. Why do...

3⁴⁹

Shop By

Equipment

Recently Viewed Products