Menu
Cart 0

Shop By

Equipment

Grid View List View
Duotight - Picnic Tap

Duotight - Picnic Tap

Picnic Party Taps are an inexpensive way to pour beer and great for portable light weight systems that you can take away with you. Now even better with the addition...

399
Multi Post for Cornelius Type Kegs (Fits Gas and Liquid)

Multi Post for Cornelius Type Kegs (Fits Gas and Liquid)

This post is compatible with all the standard Cornelius type kegs. To remove or fit this post you will need a 17mm socket set (or 11/16inch) or you can use...

899
Premium Regulated CO2 Regulator / Charger - 1/8" BSP to MFL

Premium Regulated CO2 Regulator / Charger - 1/8" BSP to MFL

This Premium Regulated CO2 Charger is the compact solution for portable setups. Simply screw on the MFL threaded disconnect, then using the needle valve adjust how much pressure you need. Premium...

4999
KegLand Series X - Kegerator (With Double Stainless Tower & 2 NUKATAP)

KegLand Series X - Kegerator (With Double Stainless Tower & 2 NUKATAP)

KEGERATORS SHIP WITH $100 FLAT RATE SHIPPING TO ALL CANADIAN PROVINCES! PLEASE NOTE: KEGERATORS ONLY SHIP VIA UPS, AND CANNOT SHIP TO A PO BOX. Available at our Burnside location or...

98796
KegLand Series X - Kegerator Fridge ONLY

KegLand Series X - Kegerator Fridge ONLY

$100 FLAT RATE SHIPPING TO ALL CANADIAN PROVINCES! (NOTE: KEGERATORS ONLY SHIP VIA UPS, AND CANNOT SHIP TO A PO BOX) Our next generation Series X Kegerator is the best Kegerator money can...

89999
Series X Plus Kegerator Only

Series X Plus Kegerator Only

The worlds most compact turnkey solution for an 8 x Keg kegerator. This model is great value, fits 8 x corny kegs or 2 x 50L kegs. Suitable for two...

1,09999
Duotight - 4.5mm(3/16) Barb to 6.35mm(1/4) Stem

Duotight - 4.5mm(3/16) Barb to 6.35mm(1/4) Stem

  This duotight barb to stem fitting is what you can use to connect a duotight fitting on one side then push tubing over the barb on the other side...

299
Series X Plus Kegerator with (With 2 x Double Stainless Tower & 4 x NUKATAP)

Series X Plus Kegerator with (With 2 x Double Stainless Tower & 4 x NUKATAP)

The worlds most compact turnkey solution for an 8 x Keg kegerator. This model is great value, fits 8 x corny kegs or 2 x 50L kegs. Suitable for two...

1,47593
KegLand Series X - Kegerator (With Single Stainless Tower & 1 NUKATAP)

KegLand Series X - Kegerator (With Single Stainless Tower & 1 NUKATAP)

KEGERATORS SHIP WITH $100 FLAT RATE SHIPPING TO ALL CANADIAN PROVINCES! PLEASE NOTE: KEGERATORS ONLY SHIP VIA UPS, AND CANNOT SHIP TO A PO BOX. This is one configuration you can...

1,03498
Duotight - 8mm (5/16) Female x 8mm (5/16) Female One Way Check Valve (Gas)

Duotight - 8mm (5/16) Female x 8mm (5/16) Female One Way Check Valve (Gas)

This very handy fitting could save you your regulator and is a good investment. This particular type of check valve has low opening pressure of only 1psi.  This check valve...

499
Duotight - 9.5mm (3/8”) Female x 5/8” Female Thread (suits Keg Couplers and Tap Shanks)

Duotight - 9.5mm (3/8”) Female x 5/8” Female Thread (suits Keg Couplers and Tap Shanks)

Looking for high quality push in fittings that will seal tight?  duotight are the push in fitting with superior sealing capacity due to the double o-ring sealing design. Why do...

399
Duotight - 8mm (5/16”) Female x 9.5mm (3/8”) Female Reducer

Duotight - 8mm (5/16”) Female x 9.5mm (3/8”) Female Reducer

Looking for high quality push in fittings that will seal tight?  Duotight are the push in fitting with superior sealing capacity due to the double o-ring sealing design. Why do...

349
Duotight 5/16 Elbow

Duotight 5/16 Elbow

This Elbow piece is suitable for our EVABarrier Beer & Gas hosing in 4mm ID & 5mm ID line or most lines with  8mm outer diameter. No clamps necessary! We...

399
x