Black Friday 2025

NUKATAP - Seal Kit

This pretty handy kit contains all the seals needed for both the standard Nukatap and the Flow Control Nukataps.

Liquid Ball Lock Spout (Intertap/NUKATAP)

Convert your NukaTap or Intertap into a ball lock post for absolute filling control with your bottle gun/counter-pressure filler or improvised growler attachments all without opening the fridge door!

14⁹⁹

Regulator Wrench

For tightening and loosening of regulator from co2 unit.

7⁹⁹

Duotight - 4.5mm(3/16) Barb to 6.35mm(1/4) Stem

This duotight barb to stem fitting is what you can use to connect a duotight fitting on one side then push tubing over the barb on the other side...

2⁹⁹

Ball Lock Disconnect Spund Valve G2

This easy to use and compact Spunding valve is handy for keg transfers or pressurized fermentations when you want to limit oxygen exposure and use counter pressure in the keg...

16⁹⁹

Kegland Beer Line Cleaning Kit

Are you ever in a situation where you don't want to unhook your gas line from your kegs, or have ball lock disconnects that you need to clean over at...

19⁹⁹

EVABarrier 3/8 Tubing Large (ft)

This high quality beer line will keep your previous beverage in it's best possible condition in the process. This 6mm size is a larger size normally either used for gas...

1²⁹

Keg - New Ball Lock AMCYL, Pepsi (19 L)

AMCYL single handle 5 gallon (19L) ball lock keg. 304 Stainless Steel Body Single Steel Handle Rubber Boot Bottom Manual Pressure Relief Built Into Lid Made in an ISO 9001...

149⁹⁹

NUKATAP (Stainless Steel)

NUKATAP the tap that blasts the competition because of their cutting edge foam reduction technology thanks to their innovative shuttle. Display these taps perfectly on our All Stainless Steel Towers. Most Sanitary Forward...

46⁹⁹

Regulator Gauge - High Pressure (0-3000 PSI)

0-3000 PSI gauge guardBrass construction1/4 NPT thread (to suit most regulators)

12⁹⁹

Single Use Clamp

Once installed, the entire inner band of the clamp is smooth. These clamps adapt to hose expansion and contraction. Requires a clamper for installation and removal.

1⁹⁹

Tap - Tail Hex Nut

Holds tail nipple in place.

2⁹⁹

Drip Tray for Bar (double 12"x5")

Bar top stainless drip tray.

74⁹⁹

Duotight - 8mm (5/16) Female x 8mm (5/16) Female One Way Check Valve (Gas)

This very handy fitting could save you your regulator and is a good investment. This particular type of check valve has low opening pressure of only 1psi. This check valve...

4⁹⁹

Duotight - 9.5mm (3/8”) Female x 5/8” Female Thread (suits Keg Couplers and Tap Shanks)

Looking for high quality push in fittings that will seal tight? duotight are the push in fitting with superior sealing capacity due to the double o-ring sealing design. Why do...

3⁹⁹

Duotight - 8mm (5/16”) Female x 9.5mm (3/8”) Female Reducer

Looking for high quality push in fittings that will seal tight? Duotight are the push in fitting with superior sealing capacity due to the double o-ring sealing design. Why do...

3⁴⁹

Duotight 5/16 Elbow

This Elbow piece is suitable for our EVABarrier Beer & Gas hosing in 4mm ID & 5mm ID line or most lines with 8mm outer diameter. No clamps necessary! We...

3⁹⁹

Duotight - 8mm (5/16) Filter (100 mesh)

This filter strainer (100 Micron) is designed to remove larger particles easily and efficiently which helps protect your brewing equipment to home inline water filters.This can also be used as a...

9⁹⁹

Stainless Keg Dip Tube - Short/Gas

Long/Liquid Stainless Keg Dip Tube suitable for 19L Cornelius style kegs. Can be cut down to suit 9.5L Liquid Tube.Comes with a dip tube o-ring

6⁹⁹

Keg Dip Tube long

Long/Liquid Stainless Keg Dip Tube suitable for 19L Cornelius style kegs. Can be cut down to suit 9.5L Liquid Tube.Comes with a dip tube o-ring

13⁹⁹

Shop By

Black Friday 2025

Recently Viewed Products