Beer Equipment

2 Inch Tri-Clover Bulkhead - Weldless Bulkhead

This part is custom made for KegLand and is a part you can use to drill a 45-47mm hole into the wall of a tank or lid of a fermenter...

48⁹⁹

Anvil High Precision Digital Scale

Anvil Brewing Equipment high precision digital scale has a 4”X 4” stainless steel weighing surface and a capacity of 4.4lb (2 KG) and a precision of 0.005 oz. (0.1g)! Perfect...

39⁹⁹

Anvil Large Grain Scale

Anvil Brewing Equipment high capacity digital grain scale handles up to 65lb with 0.02lb accuracy! The huge 12.5” X 11.75” stainless steel weighing surface is big enough to support about any size...

109⁹⁹

Blichmann RipTide Brewing Pump - Noble Grape

Blichmann RipTide Pump - NPT

Gone are the days of making do with a general purpose pump such as the March 815 and all the variant imported copies. These pumps are cumbersome to disassemble, difficult...

349⁹⁹

Blichmann RipTide Pump - Tri-Clamp

Gone are the days of making do with a general purpose pump such as the March 815 and all the variant imported copies. These pumps are cumbersome to disassemble, difficult...

349⁹⁹

Camlock Disconnect - Female (1/2" Barb)

304 Stainless steel Camlock disconnect.

9⁹⁹

Grainfather - SF70 Casters

Casters for SF70 legs.

12⁹⁹

Keg-To-Keg Filter

Give your beer a finished sparkle with the Keg-To-Keg filter. For use with ball lock kegs. Kit includes: 2 x Ball lock "Out" Connectors 2 x Pipe Clamps Pad Housing...

69⁹⁹

KegLand Series X - Kegerator Fridge ONLY

$100 FLAT RATE SHIPPING TO ALL CANADIAN PROVINCES! (NOTE: KEGERATORS ONLY SHIP VIA UPS, AND CANNOT SHIP TO A PO BOX) Our next generation Series X Kegerator is the best Kegerator money can...

799⁹⁹

Quick Disconnect - Female (1/2" FPT)

304 Stainless Steel quick connect pressure tested at 60 PSI

12⁹⁹

Series X Plus Kegerator Only

The worlds most compact turnkey solution for an 8 x Keg kegerator. This model is great value, fits 8 x corny kegs or 2 x 50L kegs. Suitable for two...

1,099⁹⁹

Ss Brewtech 8 Inch Gasket

8" TC gasket for cooling coil lid on 20 gal, 1BBL Brite Tanks, and 1BBL Unitanks.

13⁹⁹

Ss Brewtech Brew Bucket Heating & Chilling Upgrade Kit 7 gal

Only compatible with 7 Gallon Brew Buckets. The FTSs² uses a precision temperature controller that constantly monitors the temperature of your fermentation to within 1° of its set point. When...

399⁹⁹

Ss Brewtech Brew Bucket O Rings

Replacement O-rings for the Brew Bucket ball valve & racking arm. 4 pcs 8.5mm x 1mm 2 pcs 16mm x 1.8mm

2⁶⁹

Ss Brewtech Chronical O Rings

Replacement O rings for Chronical and Unitank racking arm. 4 pcs - 10mm x 1.2mm

4⁹⁹

Ss Brewtech Chronical/Unitank Heating Upgrade Kit

This upgrade kit is for existing owners of our FTSs system that want a two stage switchable controller and a custom heater pad for their fermenter. Kit includes: 1x heater...

199⁹⁹

Ss Brewtech CIP Spray Ball

Ss Brewtech's clean in place (CIP) spray ball makes cleaning your brewing equipment (almost) effortless. Use it on anything with a 3" triclamp. From kettles and fermenters to brite tanks and unitanks,...

69⁹⁹

Ss Brewtech Digital Thermometer

Replacement digital thermometer for BME Chronical & InfuSsion Mash Tun. Reads temperature quickly and accurately. Not intended for boiling temperatures. Features: Digital temp sensor Easy to read LCD display Batteries...

26⁹⁹

Ss Brewtech Inline Oxygenation Kit

The Inline Oxygenation Kit is designed to oxygenate wort during transfers into BME Chronicals and Unitanks after chilling. It uses a fully welded oxygen stone and connects with sanitary 1.5"...

159⁹⁹

Ss Brewtech Kettle Compression Washers

High temp PTFE washer Set of 2 pcs For thermometer port plug For 1/2" ball valve fitting For thermometer coupling

2⁹⁹

Shop By

Beer Equipment

Recently Viewed Products